EVGA Z270 FTW-K Initial Installation page 42

EVGA Z270 FTW – K (132-KS-E277)
24pin ATX Power (ATX_PWR_24P)
is the main power supply connector located along the lower-
ATX_PWR_24p
right edge of the board. Make sure that the power supply cable and pins are
properly aligned with the connector on the motherboard. Firmly plug the
power supply cable into the connector and make sure it is secure.
The 24-pin Power Connector may be standard or right-angled depending on
your motherboard model.
- 42 -