EVGA Z270 FTW-K Initial Installation page 12

EVGA Z270 FTW – K (132-KS-E277)
8. VCC
a. RED: Voltage detected (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
9. VSM
a. YELLOW: Voltage detected (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
10. CATERR
a. CATERR stands for Catastrophic Error on the processor.
b. RED: Processor error has occurred.
c. Off: No error state detected in the CPU.
11. CC_LED
a. USB 3.1 Type-C detection.
b. RED: Indicates device is attached and detected to USB Type-C.
c. OFF: No device detected.
12. M.2 Socket3
a. RED: M.2 detection/activity.
i. Some devices do not have full activity detection support; for
example, the LED will turn on when a SM951 drive is attached
and blink while accessing. However, a XP941 drive does not
support that function.
ii. Rather than staying a solid red for "ON," some devices will
blink when detected/active. This is specific to some devices.
b. OFF: No device attached.
13. M.2 Socket1
a. RED: WiFi activity.
i. Rather than staying a solid red for "ON," some devices will
blink when detected/active. This is specific to some devices.
b. OFF: No device attached.
14. M.2 Socket1
a. RED: Bluetooth activity.
b. OFF: No device attached.
15. Audio Trace
a. RED: This LED backlights the isolated Audio traces. When the LED
is on, it merely shows the PC is on and the light is not disabled in
BIOS. The lights may be enabled/disabled in BIOS under the option
"Audio Backlight."
- 12 -