Rinse Aid - EdgeStar DWP60ES Owner's Manual

Edgestar dwp60es: user guide
Table of Contents

Advertisement

Use Jet-Dry Rinse Agent
Jet-Dry rinse agent removes spots and prevents new film build-up on
your dishes, glasses, flatware, cookware and plastic.
Filling the Dispenser
The rinse agent dispenser holds 3.5 oz. of rinse agent. Under normal
conditions, this will last approximately one month. Try to keep it full, but
do not overfill.
1.Make sure the dishwasher door is fully open.
2.Turn the dispenser knob to the left and lift it out.
3.Add rinse agent until the indicator window looks full.
4.Clean up any spilled rinse agent with a damp cloth.
5.Replace the dispenser knob.
Rinse Aid Setting
The amount of rinse agent released into the final wash can be adjusted.
The factory setting is at the midpoint. If there are rings of calcium
(hard water) spots on dishes, try a higher setting.
To adjust the setting
Remove the dispenser knob; then turn the adjuster counterclockwise
to increase the amount of rinse agent.
11

Advertisement

Table of Contents
loading

Table of Contents