Adding Dishes; End Of Wash; Forget To Add A Dish; At The End Of The Wash Cycle - EdgeStar DWP60ES Owner's Manual

Edgestar dwp60es: user guide
Table of Contents

Advertisement

13

Forget to Add a Dish?

A dish can be added any time before the detergent cup opens.
1. Press the START/PAUSE button.
2. Open the door slightly to stop the washing.
3. You can open the door after the spray arms stop spinning.
4. Add remaining dishes.
5. Close the door.
6. Press the START/PAUSE button.
The dishwasher will restart after 10 seconds.

At the End of the Wash Cycle

When the selected wash cycle has finished, the buzzer of the dishwasher
will sound for 8 seconds. The wash cycle is completed when all phase
indicating lights are off.
Removing the Dishes
1. Switch off the dishwasher by pressing the ON/OFF button.
2. Turn off the water tap!
3. Open the door carefully. Leave the door ajar and wait a few
minutes before removing the dishes. This will allow the dishes
to cool and assist in the drying process.
4. Unload the dishwasher. It is normal for the dishwasher to be
wet inside.

Advertisement

Table of Contents
loading

Table of Contents