Removing Filter Types; Controlling Type Filters; Clearing Wireless Clients From The Ap; Setting Logging Options - 3Com AirConnect User Manual

72 C 6: C
HAPTER ONFIGURING THE
Clearing Wireless
Clients from the AP
Setting Logging
Options
AP U ASCII I
SING THE NTERFACE

Removing Filter Types

To remove packet types from the Type Filtering list, do the following:
1 Select Set Type Filtering from the Main Menu.
1 Highlight the packet type by pressing up/down arrows.
2 Select Delete.

Controlling Type Filters

Set the type filters to forward or discard the types listed. To control the type
filtering mode:
1 Select Set System Configuration from the Main Menu.
2 Select Type Filtering.
3 Press space bar to toggle between the Forward, Discard or Disable type filtering.
4 Press Enter to confirm your choice.
5 Select Save ALL APs [F2] to save the Type Filtering Setup information to all APs
with the same WLAN Service Area.
You can execute this option only among the same hardware platforms and
firmware versions.
The Clear wireless client Table feature ensures that wireless clients associating with
the AP are active. You should only clear the wireless client association table for
diagnostic purposes, or if the AP has many wireless client associations that are no
longer in use.
To clear wireless clients associated with an AP, do the following:
1 Select Special Functions from the Main Menu.
2 Select Clear wireless client Table.
The AP removes the wireless clients associated with it. Wireless Clients cleared
from an AP attempt to reassociate with the AP or another nearby AP.
The AP keeps an event log based on settings for logging options. This allows the
administrator to log important events and keeps the log concise through the
128-entry circular buffer. To set even logging options, do the following:
1 Select Set Event Logging Configuration from the Main Menu, which generates the
Event Logging Configuration window.
2 Set Any Event Logging to Enabled to log all events.
3 Disable events that do not require logging when Any Event Logging is disabled.