EchoStar DSB-890 2Ci User Manual page 27

Installation setup
1. SAT
2. Longitude
3. LNB
4. TP
5. Search mode
Installation setup
1. SAT
2. Longitude
3. Frequency
4. Polarity
5. Symbol rate
6. Channel
7. Video PID
8. Audio PID
9. PCR PID
www.echostar-int.com
Program SAT
To define the satellite you want to search channels on. For motorized systems, allow the dish
some time to move to the selected SAT until the signal indicator shows a reading.
Red: Direct access to the edit menu; to add/edit a satellite that is not listed.
(Motorized only); To define the orbital position of the defined SAT.
To define the LNB that you use in your system.
Red: Direct access to the User LNB menu; to add a LNB that is not listed.
Shows a transponder, from the internal database, of the defined SAT. If the signal indicator
shows low levels, select another TP that gives a better signal.
Green: Direct access to the edit menu; to add/edit a transponder that is not listed.
To define the required search mode for a full, update or limited search.
Search channels Search channels does a channel search on the defined SAT.
Wait until the signal indicator shows a reading, before you press the OK key to continue.
Edit
To define the satellite you want to edit.
Red: to add a satellite that is not listed.
Green: to edit the selected satellite.
To define the orbital position of the defined SAT.
To define the Frequency of the transponder.
Red: to add a Frequency that is not listed.
Green: to edit the selected Frequency.
To select Horizontal or Vertical polarity.
To define the Symbol rate of the transponder.
To define the name of the channel.
Red: to add a channel that is not listed.
Green: to edit the selected channel name.
To define the Video PID of the selected channel.
To define the Audio PID of the selected channel.
To define the PCR PID of the selected channel.
Confirm To save the settings and return to the sub-menu banner.
Description and Operation
Page 2 - 13