Table of Contents
Advertisement
I
USALS
F YOU HAVE AN
INSTALLATION
1. Switch the receiver to ON and wait for the
Languages menu to appear.
2. For Pre-programmed Lists, select Off.
3. Make the required language selections.
4. Select Continue and press the OK key.
5. Make the required TV system selections.
6. Select Continue and press the OK key.
7. Make the required User profile selections.
8. Select Continue and press the OK key.
9. Select System 6.
10. Refer to the installation instructions as given
in the USALS installation guide.
11. Select Continue and press the OK key.
12. Set the East (EL) and West (WL) limits.
13. Select My longitude.
14. Press the OK key and set the longitude of
the installation site (dish).
15. Select My latitude.
16. Press the OK key and set the latitude of the
installation site (dish).
17. Select Continue and press the OK key.
18. Select your first satellite and make the
required selections.
19. Allow the dish some time to move towards
the selected satellite.
20. When the signal shows, select Search
channels and press the OK key.
21. Wait for the Search channels to complete.
22. Press the OK key to select another satellite
or Continue to advance.
23. Set the Local time and press the Red key to
confirm the selections.
24. Select Continue and press the OK key.
www.echostar-int.com
Getting Started
Q
UICK REFERENCE GUIDE
Select System 6.
Set the Latitude and Longitude.
Select the satellite to search channels on.
Page 1 - 3
Advertisement
Table of Contents
