How To Connect Your Dish To The Echostar Ad-3000Ip Viaccess - EchoStar AD-3000 IP Viaccess User Manual

Analog/digital, postioner receiver with embedded viaccess and common interface

Hide thumbs Also See for AD-3000 IP Viaccess:

Table of Contents

6. How to connect your dish to the EchoStar AD-3000IP VIACCESS

One Actuated Dish

1. Connect the IF OUT and LNB IN connectors using the loop through cable provided with the EchoStar AD-3000IP VIACCESS.

2. Connect the LNB IN socket of the EchoStar AD-3000IP VIACCESS to the LNB.

3. Connect motor wires to M1 and M2. Switch these connections if the motor moves to the wrong direction.

4. Connect sensor wires to M.PULSE and GND connector.

5. Connect a mechanical polarotor to +5V, GND and SKEW connectors. [optional]

6. Connect ferrite polarizer to ferrite connectors. [optional]

Universal LNB

One Actuated Dish with C/Ku feed

1. Connect the IF OUT and LNB IN connectors using the loop through cable provided with the EchoStar AD-3000IP VIACCESS.

2. Connect the cables from C and Ku-band LNB to a 12 Volt C/Ku switch.

3. Connect the coaxial cable from the 0/12 Volt switch to the LNB IN connector.

4. Connect the power cable which comes from the 0/12 Volt switch to the 0/12V(connector).

5. Connect motor wires to M1 and M2. Switch these connections if the motor moves to the wrong direction.

6. Connect sensor wires to M.PULSE and GND connector.

7. Connect polarotor to +5V, GND and SKEW connectors. [optional]

ACTUATED DISH

WITH C/KU FEED

C-band Ku-band

LNB

Table of Contents

Show Quick Links

Table of Contents