Table of Contents
Advertisement
[56] How to Use
Flash Comp.
Adjusts the amount of flash light in a range of –3.0 EV to +3.0 EV.
Flash compensation changes the amount of flash light only. Exposure
compensation changes the amount of flash light along with the change of the
shutter speed and aperture.
1. MENU →
Selecting higher values (+ side) makes the flash level higher, and lower
values (– side) makes the flash level lower.
Note
[Flash Comp.] does not work when the shooting mode is set to the following
modes:
[Intelligent Auto]
[Superior Auto]
[Sweep Panorama]
[Scene Selection]
The higher flash effect may not be visible due to the limited amount of flash light
available, if the subject is outside the maximum range of the flash. If the subject
is very close, the lower flash effect may not be visible.
[57] How to Use
Switching the screen display (Shooting)
You can change the display contents on the screen.
1. Press the DISP (Display Setting) button.
Each time you press the DISP button, the recording information display
changes.
Graphic Display
Using shooting functions
(Camera Settings) → [Flash Comp.] → desired setting.
Using shooting functions
Using the flash
Selecting a screen display mode
Advertisement
Table of Contents
