Pre-Positions And Tours - Bosch AUTODOME IP 4000i NDP‑4502‑Z12 User Manual

AUTODOME IP 4000i
1.
2.
3.
North point
–
–
Alternative home position
Click Set to set the alternative home position for the camera.
Click Clear to clear the alternative home position.
6.14

Pre-positions and Tours

The camera can store up to 256 preset scenes. You can define the individual scenes that
comprise a Pre-position Tour.
You define individual pre-position scenes, then use these scenes to define the Pre-position
Tour. The tour starts from the lowest scene number in the tour and progresses sequentially to
the highest scene number in the tour. The tour displays each scene for a specified dwell time
before advancing to the next scene.
By default, all scenes are part of the Pre-position Tour unless removed.
To define and edit an individual pre-position:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. To view a pre-position in the preview window, select the pre-position in the list and click
11. To view a pre-position from the Live page:
Bosch Security Systems
Determine the North compass heading, then move the camera to that position.
Select the radio button On for the parameter Compass.
Click the button next to North point to set the calibration point.
Click the Set button to overwrite the existing North point. A dialog box appears with the
message, "Overwrite North point?" To confirm, click OK. To cancel, click Cancel.
Click the Clear button to reset the North point to factory defaults. A dialog box appears
with the message, "Reset North point to factory defaults?" To confirm, click OK. To
cancel, click Cancel.
Set the pre-position in the video image.
– Use the PTZ controls to move the camera into position.
– Using the Live preview window as reference, navigate to the scene that you want to
define as a pre-position.
Click the button Add pre-position ("+") to define the pre-position.
Select a number for the pre-position, from 1 to 256.
Type an optional name for the pre-position, up to 20 characters long.
Click OK to save the pre-position to the list Pre-positions.
To include the pre-position in a standard tour, select the check box to the left of the field
"Include in standard tour (marked with *)." An asterisk (*) appears to the left of the
name in the list Pre-positions.
For IR cameras only: To add IR light to the pre-position, select the check box to the left of
the field "IR light (marked with #)".
To delete a pre-position from the list, select the pre-position and click the button Delete
pre-position ( ).
To overwrite an existing pre-position:
– Use the PTZ controls to navigate to the new pre-position.
– In the list Pre-positions, select the pre-position that you want to overwrite.
– Click the button Overwrite pre-position (disk icon) to apply the new pre-position to
the existing pre-position.
– To change the name of the pre-position, double-click the pre-position in the list.
Then, change the name in the dialog box Edit Pre-position and click OK.
the button Show pre-position (eye icon).
User Manual
Camera | en 41
2020-06 | 2.0 |