Certification; Approvals; Csa - Siemens SIMATIC NET RUGGEDCOM RS940G Installation Manual

Certification

The RUGGEDCOM RS940G device has been thoroughly tested to guarantee its
conformance with recognized standards and has received approval from recognized
regulatory agencies.
6.1

Approvals

This section details the standards to which the RUGGEDCOM RS940G complies.
6.1.1

CSA

This device meets the requirements of the following Canadian Standards Association
(CSA) standards under certificate 1550963:
•
•
•
•
•
The device is marked with a CSA symbol that indicates compliance with both
Canadian and U.S. requirements.
C
It is specifically approved for use in hazardous locations defined as:
•
RUGGEDCOM RS940G
Installation Manual, 01/2021, C79000-G8976-1036-07
CAN/CSA-C22.2 No. 0-M91
General Requirements - Canadian Electrical Code, Part II
CAN/CSA-C22.2 No. 142-M1987
Process Control Equipment Industrial Products
CAN/CSA-C22.2 No. 213-16
Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class
III, Divisions 1 and 2 Hazardous (Classified) Locations (Bi-National Standard with
ANSI/ISA-12.12.01-2016)
UL 916
Standard for Energy Management Equipment
ANSI/ISA-12.12.01-2015
Non-Incendive Electrical Equipment for Use in Class I and II, Division 2 and Class
III, Division 1 and 2 Hazardous (Classified) Locations
US
Class I, Division 2, Groups A, B, C, D
6
31