Tunturi Platinum PRO 5.0 User Manual page 27

Setting screen (1) (FIG. E-15)
- Turn the jog wheel to adjust target heart rate value.
(The percentage varies with bpm value)
- Press the jog wheel to confirm and enter the Setting
screen (2)
Setting screen (2) (FIG. E-16)
- Turn jog wheel to select item
- Press the jog wheel button for confirmation and
continue the range setting at the right.
- Turn jog wheel to change setting ranges
- Press the jog wheel button to confirm and enter the
Workout screen.
Workout screen (FIG. E-29)
- A message of "No Heart Rate" is shown if the user's
heart rate is not detected during workout.
☞
To stop your workout
"End your workout"
(  26 )
Manual
(FIG. E-08)
- Turn the jog wheel and select
"Manual"
- Press the jog wheel to confirm and enter the Setting
screen (1).
Setting screen (1) (FIG. E-13)
- Turn jog wheel to select item
- Press the jog wheel button for confirmation and
continue the range setting at the right.
- Turn jog wheel to change setting ranges
- Press the jog wheel button to confirm and enter the
Workout screen.
Workout screen (FIG. E-23)
- During workout, press the jog wheel button to
switch the Y-axis between Nm incline/ bpm
- The white dot line shows current position, which
moves rightward as calorie /time/distance increases.
- The orange curve shows the user's actual heart rate,
which varies as the heart rate frequency goes up
and down
☞
To stop your workout
"End your workout"
(  26 )
Preset Programs
(FIG. E-09)
- Turn the jog wheel and select
"Preset Programs"
- Press the jog wheel to confirm and enter the Setting
screen (1).
Setting screen (1) (FIG. E-47)
- Turn the jog wheel to select program
- Press the jog wheel to confirm and enter the Setting
screen (2)
Setting screen (2) (FIG. E-14)
- Turn jog wheel to select item
- Press the jog wheel button for confirmation and
continue the range setting at the right.
- Turn jog wheel to change setting ranges
- Press the jog wheel button to confirm and enter the
Workout screen
Workout screen ( Incline Control )
(FIG. E-48)
Workout (Heart Rate Control)
(FIG. E-27)
☞
To stop your workout
"End your workout"
(  26 )
Own Trainings
(FIG. E-10)
- Turn the jog wheel and select
"Preset Programs"
- Press the jog wheel to confirm and enter the Setting
screen (1).
NOTE
When no saved trainings are found below window will
appear. (FIG. E-44)
- Press jog wheel to go back to main menu
Setting screen (1) (FIG. E-40)
Setting Screen (1) is for user's saved items and training
records.
They are shown in the right and left screen.
- Turn jog wheel to select item
- Press the jog wheel button to confirm and to open
selection window.
Selection window (FIG. E-43)
- Turn the jog wheel and select item
2 7
English