Weee; Spare Parts; Electrical Schematic; Suggested Accessories - Lincoln Electric PF22 Operator's Manual

WEEE

Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2012/19/EC on Waste Electrical and Electronic Equipment (WEEE)
and its implementation in accordance with national law, electrical equipment that has reached the end of its
life must be collected separately and returned to an environmentally compatible recycling facility. As the
owner of the equipment, you should get information on approved collection systems from our local
representative.
By applying this European Directive you will protect the environment and human health!

Spare Parts

Part List reading instructions

Do not use this part list for a machine if its code number is not listed. Contact the Lincoln Electric Service
Department for any code number not listed.

Use the illustration of assembly page and the table below to determine where the part is located for your particular
code machine.

Use only the parts marked "X" in the column under the heading number called for in the assembly page (# indicate
a change in this printing).
First, read the Part List reading instructions above, then refer to the "Spare Part" manual supplied with the machine, that
contains a picture-descriptive part number cross-reference.

Electrical Schematic

Refer to the "Spare Part" manual supplied with the machine.

Suggested Accessories

K14126-1
K14121-1
K14122-1
K14123-1
K14124-1
K14132-1
K14131-1
K14042-1
K10158-1
K363P
K10349-PG-xxM
K10349-PGW-xxM
K10348-PG-xxM
K10348-PGW-xxM
KP10519-8
K10513-26-4
FL060583010
E/H-400A-70-5M
English
RC 42 - remote control for PF 40 and 42
Replaceable Front Panel with User Interface, A+.
Replaceable Front Panel with User Interface, B.
Replaceable Front Panel with User Interface, B+.
Case of remote control (PENDANT).
5-PIN/12-PIN adapter.
®
ArcLink "T" Connector Kit.
Adapter for spool type S200.
Adapter for spool type B300.
Adapter for spool type Readi-Reel
Source/wire feeder cable (gas). Available in 5, 10 or 15m
(Speedtec, Power Wave S350, S500 CE).
Source/wire feeder cable (gas and water). Available in 5, 10 or 15m.
(Speedtec, Power Wave S350, S500 CE).
Source/wire feeder cable (gas). Available in 5, 10 or 15m
(Power Wave 455M, Power Wave 455M/STT, Power Wave 405M).
Source/wire feeder cable (gas and water). Available in 5, 10 or 15m
(Power Wave 455M, Power Wave 455M/STT, Power Wave 405M).
TIG – Euro adapter.
TIG Torch LT 26 G (180A DC / 130A AC @ 35%) – 4m.
FLAIR 600 Gouging torch with mounted lead 2,5m.
Welding cable with electrode holder to SMAW process - 5m.
®
.
28
07/06
12/05
English