Sony VAIO PCG-R505ELK User Manual page 66

Vaio laptop computers: vaio superslim notebook computer
Hide thumbs Also See for VAIO PCG-R505ELK:
Table of Contents

Advertisement

If your computer is connected to the docking station
If you want to exchange data with another computer using the optional i.LINK cable and your computer is connected to the
docking station (supplied with selected models), perform the following:
1.
Disconnect your computer from the docking station as described in the
docking station
section.
2.
Disconnect the AC adapter and all cables from the docking station.
3.
Using a thin pen tip, set the i.LINK network switch on the bottom of the docking station to the side marked
Do not set the i.LINK network switch when the computer is on. The computer will malfunction.
i.LINK Network Switch
4.
Connect the docking station to your computer as described in the
station
section.
5.
Turn on the computer, and use the i.LINK cable to connect your computer to another computer.
6.
After you have finished the "smart connect" session tasks, proceed as follows:
Disconnect your computer from the docking station.
Disconnect the i.LINK cable and all other cables from the docking station.
Set the i.LINK network switch to the unmarked side.
Disconnecting the computer from the
Connecting the computer to the docking
.
Page 66

Advertisement

Table of Contents
loading

Table of Contents