Set Password; View Event Logs - NETGEAR CG3700EMR-1CMNDS User Manual

Erase sets the user name to admin, the password to password, and the LAN IP address
to 192.168.0.1, and enables the DHCP of the gateway.

Set Password

This feature allows you to change the default password that is used to log in to the gateway
with the user name admin.
This gateway password is not the same as the password for wireless access. The label on
your gateway shows your unique wireless network name (SSID) and password for wireless
access (see Gateway Label

To set the password for the user name admin:
1. Select ADVANCED > Administration > Set Password.
The following screen displays.
2. Type the old password.
3. Type the new password in the Set Password field.
4. Type the new password in the Repeat New Password field.
5. Click the Apply button.
Your change takes effect.

View Event Logs

Event logs capture important gateway events.

To view the event logs:
1. Select ADVANCED > Administration > Event Log.
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
on page 10).
Administration
41