Cable Connection; View Or Configure Your Wireless Network - NETGEAR CG3700EMR-1CMNDS User Manual

Cable Connection

Use the Cable Connection screen to track the initialization procedure of the gateway, and to
get details about the downstream and upstream cable channel. The time is displayed after
the gateway is initialized.
The gateway automatically goes through the following steps in the provisioning process:
1. Scans and locks the downstream frequency and then ranges the upstream channels.
2. Obtains a WAN address for the gateway.
3. Connects to the Internet.

To change the starting frequency:
From the BASIC tab, select Cable Connection.
The starting frequency is automatically generated. Most of the time, you do not need to enter
a value in this field. If you need to enter a starting frequency, contact your Internet service
provider.

View or Configure Your Wireless Network

The Wireless Setup screen lets you view or configure the wireless network set-up.
The wireless cable gateway comes with preset security. This means that the WiFi network
name (SSID), network key (password), and security option (encryption protocol) are preset in
the factory. You can find the preset SSID and password on the label of the unit.
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
NETGEAR genie Basic Settings
16