Technical Specification - BBV FBM Installation Manual

Technical Specification

Power Requirements
Inputs
Outputs
Telemetry
Items included:
• 1 x FBM Video Matrix (including 19 inch rack mounting ears) - with 3 slots.
• Matrix Switch & CPU
• 12Vdc PSU 7.5A - for FBM monitor
• Monitor Assy & PSU & F8
• Manual
• Quick Setup Guide
• Operation Guide
• 1 x Cat5 cable (Blue)
• 1 x Cat5 cable (White)
• TX1500 system keypad
• Metal Ears
• Metal Screws For Ears
• M4 Screws For Monitor
• USB Stick for system backup
* Please contact BBV Technical Support (support@bbvcctv.com) for configuration options
** Third party telemetry protocols are supported by the FBM matrix if a BBV Starcard Converter is used and other products,
please contact BBV Technical support for a complete list of supported protocols or visit our website. www.bbvcctv.com
Description
The FBM is a video matrix and telemetry control system offering control of up to 512 cameras from up to 16 control / operator
positions and is capable of supporting up to 64 monitor outputs. PELCO-D telemetry is employed as the standard protocol
with optional baudrates of 2400/4800 or 9600. This will provide control for most CCTV domes/cameras. Other RS485 / RS422
protocols are supported if a BBV Starcard Converter is used. Up-the-coax telemetry can also be supported by the inclusion
of a Coax Telemetry Interface (CTI Card) in the system design.
In order to simplify RS422 site wiring, a BBV Starcard should be used. This will provide 8 x RS422 telemetry ports, each port
will support up to 32 cameras. The inclusion of a BBV Starcard in the system design also provides a degree of fault tolerance,
for example if a cable connected to a telemetry port should fail, control of the cameras connected to that port only will be
affected, all other cameras connected to the system should continue to operate as normal.
Manual Version
6.96
12Vdc 7.5A FBM matrix
512 (larger by arrangement) Camera inputs per matrix*
16 – 64 monitor outputs per matrix*
PELCO D @ 9600 N 8 1** (this protocol is available on our support website
www.support.bbvcctv.com)
Software Version
1.64
Release Date
12.11.18
7