Airlink101 AICN747W User Manual page 38

Network >> Wireless Setting
The camera supports WLAN while you use the wireless network. Select the Enable option to enable this
feature.
- Network ID (SSID}: Keep the default setting of this option to connect the camera to any access
point under the infrastructure network mode. To connect the camera to a specified access point, set
a SSID for the camera to correspond with the access point's ESS-ID. To connect the camera to an
Ad-Hoc wireless workgroup, set the same wireless channel and SSID to match with the computer's
configuration.
Click Site Survey to display the available wireless networks, so that you can easily connect to one
of the listed wireless networks.
- Wireless Mode: Select the type of wireless communication for the camera: Infrastructure or Ad-
Hoc.
- Channel: Select the appropriate channel from the list.
- Authentication: Select the authentication method to secure the camera from being used by
unauthorized user: Open, Shared-key, WPA-PSK, and WPA2-PSK. The following table explains
the four options:
Open The default setting of Authentication mode,
which communicates the key across the
network.
Shared- Allow communication only with other
key devices with identical WEP settings.
WPA-PSK/ WPA-PSK/WPA2-PSK is specially designed
WPA2- for the users who do not have access to
PSK network authentication servers. The user
has to manually enter the starting password
in their access point or gateway, as well as
in each PC on the wireless network.
- 37 -