Grizzly G0967X Owner's Manual page 72

H8875—26" Wide Outfeed Roller System
G1317—37" Wide Outfeed Roller System
These unique roller systems fold down easily
without tools and snap up in place quickly when
needed. Both units have a double level system
which lets you set the rollers either in line with the
table or slightly below it.
Figure 113. Outfeed roller system.
G5562—SLIPIT 1 Qt. Gel
®
G5563—SLIPIT 12 oz Spray
®
G2871—Boeshield T-9 12 oz Spray
®
G2870—Boeshield T-9 4 oz Spray
®
H3788—G96 Gun Treatment 12 oz Spray
®
H3789—G96 Gun Treatment 4.5 oz Spray
®
Figure 114. Recommended products for protect-
ing unpainted cast iron/steel part on machinery.
-60-
H7583—Grizzly Tenoning Jig
Our fully adjustable tenoning jig handles stock
up to 3 ⁄ " thick and features an adjustable bevel
1
4
angle with a 90° to 75° range. The two large grip
handles, adjustable guide bar, multi-position con-
trol levers, and extra large clamping handwheel
will ensure accurate and repeatable results. A top
seller!
Figure 115. Model H7583 Tenoning Jig.
T10113—Universal Overarm Blade Guard
Capture the dust that's thrown above the saw by
the higher escape velocity of the spinning blade.
This Universal Overarm Blade Guard is totally self
supporting, so there's no complicated installation
process. Just bolt it to your saw base for total
stability. It also extends for saws with wide rip
capacities and pivots out of the way for complete
versatility. Approximate shipping weight: 75 lbs.
Figure 116. T10113 universal ovearm blade
guard.
G0605X1-6X1, G0696X-97X (Mfd. 8/11)