Airlink101 ASW408POE Quick Installation Manual

Quick Installation Guide
8-Port 10/100Mbps Switch
with 4-Port PoE
Model# ASW408POE
Ver. 1A
1. Introduction
Power Over Ethernet (PoE) is an evolving technology designed to
deliver power and transmit data on an Ethernet cable at the same
time. Modeling after the technology used in telecommunication
systems which supplies power to telephones, PoE powers network
device without the need of AC electrical outlets. By eliminating the
power cords and the power infrastructure, the technology greatly
simplifies the wiring and deployment matters and brings lots of
convenience and benefits
environments.
Features
•
8 x 10/100Mbps Auto-negotiation Fast Ethernet RJ 45 with
4-Port PoE function (Port -1 to Port-4)
•
Compliant with IEEE802.3af specification
•
Support PoE Power Maximum 15.4W per PoE port
•
Support PoE Powered Device (PD ) classification identify
•
Over Current and Short-circuit Protection
•
Each port supports auto MDI/MDIX, no need to use cross-over
cables or an up-link port
•
Flow control fully supported:
- Half-duplex: backpressure flow control
- Full-duplex: IEEE802.3x flow control
•
Provide non-blocking wire speed reception and transmission
•
Embedded 768K bits SDRAM for packet buffering
•
1024-entry look-up table in direct mapping mode
•
Embedded 16-entry CAM for hash collision mapping
•
Optional maximum packet length 1536/1522 Bytes
Purpose
This Quick Installation Guide tells you how to install your Switch and
how to connect it to your Ethernet network.
Terms/Usage
In this manual, the term "Switch" (first letter upper case) refers to your
8-Port 10/100Mbps Switch with 4-Port PoE, and "switch" (first letter
lower case) refers to other Ethernet switches.
in home, office, and industrial
1