Download Print this page
Airlink101 ASW242G Quick Installation Manual

Airlink101 ASW242G Quick Installation Manual

24-port 10/100mbps switch +2 gigabit copper ports

Advertisement

Quick Links

Quick Installation Guide
24-Port 10/100Mbps Switch
+2 Gigabit Copper Ports
Model# ASW24+2G
Ver. 1A
Trademarks
Copyright © 2009 Airlink101®
Airlink101® is a registered trademark. All other trademarks
belong to their respective proprietors.
Copyright Statement
No part of this publication may be reproduced in any form or
by any means or used to make any derivative such as
translation, transformation, or adaptation without permission
from Airlink101®.
Preface
FCC Warning
This device has been tested and found to comply with limits
for a Class a digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the user's
manual, may cause interference in which case the user will
be required to correct the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the
user may be required to take adequate measures.
1

Advertisement

loading

Summary of Contents for Airlink101 ASW242G

  • Page 1 Quick Installation Guide 24-Port 10/100Mbps Switch +2 Gigabit Copper Ports Model# ASW24+2G Ver. 1A Trademarks Copyright © 2009 Airlink101® Airlink101® is a registered trademark. All other trademarks belong to their respective proprietors. Copyright Statement No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from Airlink101®.
  • Page 2 About This Guide Congratulations on your purchase of the 24-Port 10/100Mbps Switch + 2 Gigabit Copper Ports! This device integrates 1000Mbps Gigabit and 100/10Mbps Fast Ethernet network capabilities in a highly flexible package. Purpose This guide tells you how to install your Switch and how to connect it to your Ethernet network.
  • Page 3 • AC Power Connector: Supports AC 100~240V, 50~60Hz. NOTICE: Do not envelop Radiator Fan while the Switch is working. 1.2.3 LED indicators information The front panel LEDs provide instant status feedback and help monitoring and troubleshooting when needed. Figure 1-3 Front Panel view of the switch •...
  • Page 4: Technical Specifications

    an Ethernet network. network. The port is respective transmitting port is or receiving 1000 Green connected to data on the the Gigabit 1000Mbps Ethernet Ethernet network. network. 1.3 Technical Specifications Standards • IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX and IEEE 802.3ab 1000BASE-T Network Cables •...
  • Page 5: Installation

    Installing the Switch The site where you place the switch may greatly affect its performance. When installing, take the following into your consideration. 2.1 Installation Follow the guidelines below to install the Switch: Install the Switch in a fairly cool and dry place. See the Technical Specifications for the acceptable temperature and humidity operating ranges.
  • Page 6: Technical Support

    be connected to any port of the Switch via a two-pair Category 5 (or above) Cable. If the LED indicators do not light up after making a proper connection, check your network device, the cable, the Switch conditions and connections. Technical Support E-mail: support@airlink101.com Toll-Free: 1-888-746-3238*...

This manual is also suitable for:

Asw24+2g