Sony FW-43BZ35F Installation Manual page 4

1.4.3 IMPORTANT
To get the TV to auto-start signage application you must activate this in the
signage management portal.
When TV shows up in the signage management portal, open settings for this
screen with the settings wheel when hovering mouse over the screen.
Open Actions – Player setup – Android – Autostart – Enable
o
o
Confirm that this is enabled in the portal by clicking on refresh
o
and the second lowest field should be: Android Autostart: enabled
1.4.4 Disable Pro settings
After the TV have been connected to the Signage management portal press the HOME
button on the remote to come back to the TV main menu.
Open settings in top right corner – Pro settings – Change to normal mode: OK
Wait for TV to reboot
•
The TV should not display the blue bar with "Pro settings in process" anymore.
After Reboot the signage app will start after a short while.
R&D
A message on the screen should display showing "Enabling
app autostart"
2021-02-05 Page 4 of 5