Self Check Function; Self Check - Panasonic TX-32LXD500 Service Manual

4 Self Check Function

4.1.

Self Check

1. Self-Check is used to automatically check the bus lines and hexadecimal code of the TV set.
2. To get into the Self -Check mode press the Down (
time pressing the Status/Information (
3. Turn off the TV to reset JPEG Viewer circuit after SELF-CHECK.
If the CCU ports have been checked and found to be incorrect or not located then "--" will appear in place of "O.K.".
Display
MEM
GC4P
GC4L
GC3FS
HAD
AVSW1
AVSW2
Tun1
DAC1
DAC2
DAC3
MSP
SDM
HDMI
IPC
ADV
All manuals and user guides at all-guides.com
) button on the customer controls at the front of the set, at the same
) button on the remote control, and the screen will show :
Ref. No.
IC1107 Memory
IC4054 Global Core Processor
IC4057 Global Core
IC4013 Global Core for Sub
IC4012 OSD RGB A/D Converter
IC3005 AV Switch VIDEO
IC2105 AV Switch AUDIO
TU3201 Tuner
IC1106 DAC control 1
IC1116 DAC control 2
IC3006 DAC control 3
IC2106 Stereo Decoder
SD-Module MPEG4/PHOTO view, SD
recording
IC5003 HDMI I/F Receiver
IC8013 HDSL PEAKS Lite
IC4005 A/D Converter
7
TX-32LXD500 / TX-26LXD500 / TX-32LX500F / TX-32LX500P / TX-26LX500F / TX-26LX500P
Description P.C.B.
DG-Board
DG-Board
DG-Board
DG-Board
DG-Board
H-Board
H-Board
H-Board
DG-Board
DG-Board
H-Board
H-Board
SD-Module
DV-Board
XV-Board
DG-Board