Philips VoiceTracer VTR8062 User Manual page 54

(1) Loop mode
During playback, press the "Menu" button to pop up the loop
mode, you can select the desired loop mode. The reference
interface is as shown below:
Directory Playback: Play the files in the selected directory in
sequence, and stops playing automatically after all the files in
the current directory are played.
Directory loop: Loop play the selected files in the directory.
Single cycle: Playing a selected track cyclically
Random play: Playing the files in the current selected catalog
randomly
(2) Sound mode
Select the "Sound Mode" menu in the play menu list, and
54 EN
press the Menu button to enter the sound mode. The sound
mode includes the following sound effects: "Natural, Rock,
Pop, Classic, Soft, Jazz, Subwoofer". The reference interface is
shown below:
In the sound mode, you can use " " or " " to select the
corresponding mode, and then press the confirm button to
confirm.
(3) Sound mode and repeat mode
Select the "Repeat Mode" menu in the play menu list, and
then press the confirm button to enter the repeat mode.
Set AB repeat
• Set the starting point of the repeat mode: In the playing
state, short press the "Menu" button to enter the playback
menu, then short press the " " or" "button to select
the "Repeat Mode" option, and press the "OK" button to
return to the playing state. At the time, play the "A" of the
interface "AB" is flashing, waiting to confirm the repeat
start point A, and short press " " to confirm the repeat
start point A.
• Set the end point of the repeat mode: After setting the
repeat start point A, the B of the playback interface "A-B"