Removing And Installing A 2.5" Hard Disk Drive - Acer AR360 F1 Series User Manual

36
Removing and installing a 2.5" hard disk
drive
Removing a 2.5" hard disk drive with carrier
1 Observe the ESD precautions described on page 27.
2 Remove the carrier with failed HDD.
3 Remove the HDD carrier.
(1) Unlock the HDD carrier latch.
(2) Slide the HDD carrier latch to release the lever.
(3) Pull the lever up.
(4) Grasp the lever and pull the carrier from the chassis.
4 Observe the post-installation instructions described on page 28.
Installing a 2.5" hard disk drive with carrier
1 Slide the HDD carrier all the way into the drive bay.
2 Use the lever to push the HDD carrier into the chassis until it locks
in place, then close the HDD carrier lever.
3 System upgrades