Table of Contents
Advertisement
28
4
Place the system unit on a flat, stable surface.
5
Open the system according to the instructions on page 32
6
Follow the ESD precautions described in this section when
handling a server component.
Post-installation instructions
Perform the steps below after installing a server component.
1
See to it that all components are installed according to the
described step-by-step instructions.
2
Reinstall all components or cable that have been previously
removed.
3
Reinstall the top cover.
4
Reconnect the necessary cables.
5
Turn on the system.
3 System upgrades
Advertisement
Table of Contents
Troubleshooting
