Table of Contents

Advertisement

Available languages

Available languages

42

Menu

The menu is used for changing individual
settings, accessing information and
launching processes.
● Touch A to open the menu.
In the display you will see the various
setting options, the navigation symbols light
up. The current setting is marked on the
display.
Navigating through the menu:
I = move down
B = confirm / store
F
= g o back
A = o pen the menu /
exit from the menu
F
Touching I displays each setting
or selection option in order. After
you reach the lowest menu item the
topmost one is shown again.
For example:
Setting the coffee temperature to Max. :
● Touch A. The menu is opened.
● Touch I repeatedly until the display
shows Coffee temperature.
● Touch B, the display shows e.g. High
● Touch I repeatedly until the display
shows Max.
● Touch B to store the setting. The
display shows the confirmation.
● The menu item Coffee temperature
appears.
● Touch F to exit from the menu.
F
Any changes you make will be
discarded if no further entry is
made for a period of about two
minutes. The menu will then close
automatically.
Robert Bosch Hausgeräte GmbH
You can specify the following settings:
Set cup size
Set up the volume dispensed for each drink
and each size of cup. The volumes set up in
the factory can be adjusted stepwise.
● Use I to choose a drink and touch
B to confirm your choice.
● Use I to choose the desired volume
and touch B to confirm your choice.
The setting is then saved.
Languages
Setting up the language to be used for
display texts.
● Use I to choose the desired
language and touch B to confirm
your choice.
Water hardness
Set this to the hardness of the local water
supply.
You can select levels 1, 2, 3 or 4. The
preset level of water hardness is level 4.
● Use I to choose the desired water
hardness and touch B to confirm
your choice.
F
It is important to set the water hard-
ness correctly, so that the appliance
indicates accurately when the
d escaling programme should be run.
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier.
● Briefly dip the test strip in the water and
check the result after one minute.
Level Water hardness
German (°dH) French (°fH)
1
1-7
2
8-14
3
15-21
4
22-30
en
1-13
14-25
26-38
39-54

Advertisement

Table of Contents
loading

This manual is also suitable for:

 tes 65733ru

Table of Contents