Table of Contents
Advertisement
4.
Press the both side tabs to release the system fans then pull it out from the chassis.
Removing the cables from Mainboard
1.
Pull the cables from the cable click.
2.
Disconnect the CD-ROM, FDD, LED cable from the mainboard.(Left to Right)
3.
Disconnect SCSI BP cable, Fan cables and USB cable
4.
Disconnect the intrustion cable
5.
Disconnect the CD-ROM cable and SCSI cable
6.
Disconnect the two front fan cables from the fan board
7.
Disconnect the Singal cable, 24pin power cable and 8 pin power cable from the mainboard.
Removing the CD-ROM and FDD
1.
Take the CD-ROM cable out from the chassis
Chapter 3
65
Advertisement
Table of Contents
