Table of Contents
Advertisement
IDE Configuration
The IDE Configuration submenu lets you define the parameter settings related to the hard disk/s.
Parameter
IDE Configuration
S-ATA Running Enhanced Mode
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
40
Description
Enables or disables the integrated IDE. When this parame-
ter is set to P-ATA mode with the SATA Running Enhanced
Mode also enabled, it enables support for PATA IDE mode.
This mode can support a maximum of four PATA and two
SATA IDE devices.
When set to Combined Mode, the system can support a
maximum of two PATA and two SATA IDE devices.
Enables or disables the PATA and SATA device support.
Specifies the current configuration of the IDE device connected to the master
port of the primary IDE channel.
Press Enter to access the Primary IDE Master submenu.
Specifies the current configuration of the the IDE device connected to the slave
port of the primary IDE channel.
Press Enter to access the Primary IDE Slave submenu.
Specifies the current configuration of the IDE device connected to the master
port of the secondary IDE channel.
Press Enter to access the Secondary IDE Master submenu.
Specifies the current configuration of the IDE device connected to the slave port
of the secondary IDE channel.
Press Enter to access the Secondary IDE Slave submenu.
Option
P-ATA Mode
Combined Mode
Disabled
Enabled
Disabled
Chapter 2
Advertisement
Table of Contents
