Acer X1130P Service Manual page 38

(1)Disassemble the
screw*2(M3*6L), and
take off the lamp door.
9 (2)Disassemble the
screw*1(M3*4L) and
lamp wire, and take off
the lamp module.
(1)Disassemble the
screw*3(M3*8L).
(2)Disassemble the
10 grounding
screw*1(M4*6L), and
take off the Power B/D
SHD.
Disassemble the
wire*2 and screw*1
11 (M3*7L), and take off
the power BD and
ballast Mylar.
(1)Disassemble the
screw*2(M3*7L), and
take off the lamp box.
12
(2)Disassembly the
screw*2(M3*8L), and
take off the blower fan
1
2
Screw*3
screw*1
Note: Circuit boards > 10cm
rectangle as above image shows. Please detach the Circuit boards and
follow local regulations for disposal.
screw*1
screw*1
screw*1
blower fan's
thermal wire
ballast wire
2
has been highlighted with the yellow
screw*1
screw*1
38
grounding screw *1
Ballast Mylar
screw
driver
screw
driver
screw
driver
screw
driver