The Acer projector you have bought has integrated DLP and NVIDIA 3D technology. If you have connected your projector to a computer, please read sections "Using NVIDIA 3D technology" on page 4 or "Using DLP 3D technology" on page 7.
Using NVIDIA 3D Vision technology Only available with NVIDIA 3D Vision certified projectors when using NVIDIA 3D glasses. Before you can enjoy the benefits of the NVIDIA 3D technology, you will need to do the following. Ensure your graphics card is supported. Please visit www.nvidia.com/object/ 3D_Vision_Requirements.html to see if your graphics card is listed.
Page 5
Right-click anywhere on the desktop and select NVIDIA Control Panel. This will open the setup Wizard if you haven’t previously set up the 3D environment. Follow the onscreen instructions to set up the 3D environment. Check the Enable Stereoscopic 3D option and select the correct display type.
Page 6
If you are viewing Blu-ray 3D content over an HDMI 1.4a or later connection, this will be set automatically. Press the menu button on the projector remote control to open the OSD. Select the Image section (second menu option) on the left-hand side of the window.
Alternatively, press the Empowering Key on your projector’s remote control to open Acer eView Management. From the 3D options, select Nvidia 3D Vision. Using the stereoscopic player You need to have a stereoscopic player in order to view 3D content. The instructions below explain how to view 3D content using the Stereoscopic player that is available at www.3dtv.at.
Using DLP 3D technology Also available with NVIDIA 3DTV Play ready projectors when using DLP 3D glasses. Before you can enjoy the benefits of the DLP 3D technology, you will need to do the following. Ensure your graphics card supports 3D playback.
Page 9
Set 3D Glasses to DLP 3D. Alternatively, press the Empowering Key on your projector’s remote control to open Acer eView Management. From the 3D options, select DLP 3D. If you find that the 3D content is not displaying properly, try selecting 3D...
Page 10
Important: If you have an NVIDIA graphics card and the NVIDIA 3D Vision drivers installed, you may need to disable the Stereoscopic feature to use the DLP 3D technology. Using the stereoscopic player You need to have a stereoscopic player in order to view 3D content. The instructions below explain how to view 3D content using the Stereoscopic player that is available at www.3dtv.at.
Page 11
If you have a DVD or Blu-ray player that supports 3D playback, you can watch 3D DVD contant using your Acer 3D-enabled projector. Connect your DVD or Blu-ray player to the projector using any of the available input formats.
Page 12
If you find that the 3D content is not displaying properly, try selecting 3D Sync Invert from the projector OSD or Acer eView Management. If this does not improve the image, and you are using an HDMI 1.4 connection, change the 3D Format to match the signal sent by your player.