Basic Commands
Remote Start
Press and release
.
Activates (or if ON, deactivates) the remote starter. The engine and
parking lights turn ON and the Remote start LED and ON tones play
,
1
or the engine and parking lights turn OFF and the Remote start LED
and OFF tones play to confirm
. The runtime on the remote starter is
1
predetermined based on vehicle application. The remote starter will
shut down when the preset runtime times out or when any shutdown
zone becomes active.
Note
Refer to the Quick Start User Guide for more information.
Lock
Press and release
.
The doors lock (if connected) and parking lights flash once. The Lock
LED illuminates and beeps play to confirm
.
1
Unlock
Press and release
.
The doors unlock (if connected) and parking lights flash twice. The
Unlock LED illuminates and beeps play to confirm
.
1
Trunk
Press and hold
.
The Trunk opens (if connected) when this button is pressed for 5
seconds. The Aux LED illuminates and tones play to confirm
.
1
1 Confirmation LEDs, beeps and tones are only applicable to the 2625-TX remote control.
© 2016 Directed. All rights reserved.
5