The Remote Control; Using Your Remote Control; Table Of Commands; Confirmation - AstroStart QS-1U User Manual

THE REMOTE CONTROL

Your remote control works off a small, long-life 12-volt alkaline battery (23A).
The range of your remote control can be affected by a weak battery, interference from nearby metal structures, hydro poles,
or crowded parking lots.
With its electronic CODE LEARNING feature, a maximum of four remote controls can be programmed for your vehicle.
We strongly recommend that you keep a replacement battery in your glove compartment.
See your dealer for replacement batteries or for additional remote controls.

USING YOUR REMOTE CONTROL

To ensure that commands are transmitted properly, press desired button for 2
seconds.
A command will not be executed if you do not press button long enough.
The indicator light will flash while transmitting the command.
The QS-4U remote shows pictograms to help you remember the commands.
Remote(s) included in kit may differ from the ones illustrated.

TABLE OF COMMANDS

C
OMMANDS
S / S (T )
TAR TOP OGGLE
S
TART
C M
ONTINUOUS ODE
S
TOP
L T M
OW EMP ODE
T
RUNK
L
OCK
U
NLOCK
T
HIS CONFIRMATION IS SENT ONLY WHEN ENGINE IS ALREADY RUNNING UNDER REMOTE CONTROL
4 = A / 2 = D
CTIVATION

CONFIRMATION

In all cases, your Remote Starter will confirm that a command has been received properly by flashing parking lights.
With a QS-4U, the horn provides certain confirmations when connected to system (requires optional wiring and material). In
this manual, confirmation signals are written in an abbreviated form; for example:
(Lights: 2) means that the parking lights will flash twice.
Confirmations are explained in more detail under each command.
4
1
BUTTONS
√
√
/ 3 = S
EACTIVATION YSTEM NOT READY
R
EMOTES
4
BUTTONS
P
ROGRAMMABLE DURING INSTALLATION
Option 1
C
ONFIRMATION
L H
IGHTS ORN
1
1 1
1 1
1
4 / 2 / 3
3
1 1
2
.
– 2
Option 2
S
EE DETAILS ON
PAGE
5
5
6
6
7
7
7
7
L
ND OCK