Table of Contents
Advertisement
Power saving
The monitor will be driven into Power Saving" mode by the control signal from the
display controller, as indicated by the amber-color power LED.
State
LED Light
ON
Blue
Power Saving
Amber
Mode
The power saving states will be kept until a control signal has been detected or
the keyboard or mouse is activated. The recovery time from Active OFF state
back to ON state is around 3 seconds.
DDC
To make your installation easier, the monitor is able to Plug and Play with your
system if your system also supports DDC protocol. The DDC (Display Data
Channel) is a communication protocol through which the monitor automatically
informs the host system about its capabilities, for example, supported
resolutions and corresponding timing. The monitor supports DDC2B standard.
Power Adaptor
Your device uses one of the following power supplies.
Object/ Part
Manufacturer/Trademark
Type/Model
No.
Power
DELTA
ADP-30MH B
adaptor
HIPRO
HP-A0301R3
EN-8
Advertisement
Table of Contents
