Table of Contents
Advertisement
INSTALLATION
To install the monitor to your host system, please follow the steps as given be-
low:
Steps
1. 1-1
Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
1-2
Connect Digital Cable (Optional)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect one end of the 24-pin DVI cable to the back of the
monitor and connect the other end to the computer port.
2. Connect power adaptor and power cord
Connect the power adaptor and power cord to the monitor, then to aproperly
grounded AC outlet.
Your device uses one of the following power supplies:
Manufacturer: Delta Electronics Inc. , Model: ADP-30HM B
Manufacturer: Hipro Technologies, Inc. , Model: HP-A0301R3
3. Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
4. If the monitor still does not function properly, please refer to the trouble-
shooting section to diagnose the problem.
1-1
1-2
2
2
EN-12
1-1
1-2
Advertisement
Table of Contents
