Napoleon PTSS165 Accessory Mounting Instructions page 6

6
3. Slide the grill mount over top of the post and fasten with the two thumbscrews supplied.
4. Once the mounts are secured in place, the grill can be mounted:
a) Place the grill bottom on the mounting plate as illustrated. Slide the grill forward to line up the holes in the
mounting plate with the holes on the bottom of the grill.
b) Fasten the grill using the (2) thumbscrews supplied. Tighten by hand.
5. To remove post when not in use, twist collar clockwise to release. Twist post counter clockwise until the blades
on the end of the post line up with the holes in the base plate. Pull the post straight up to remove. Insert the cap
into the base plate as illustrated.
www.napoleongrills.com
Line up the thumbscrews
assembled in the mounting
plate with the holes in the
bottom of the grill.
Insert Cap