Htma Requirements - Stanley CT04 Safety, Operation And Maintenance User's Manual

1650 psi hydraulic crimping tool

Hide thumbs

Table Of Contents

Table of Contents

HYDRAULIC SYSTEM

REQUIREMENTS

FLOW RATE

TOOL OPERATING PRESSURE

(At the power supply outlet)

SYSTEM RELIEF VALVE SETTING

(At the power supply outlet)

MAXIMUM BACK PRESSURE

(At tool end of the return hose)

Measured at a max. fluid viscosity of:

(At min. operating temperature)

TEMPERATURE

Sufficient heat rejection capacity

to limit max. fluid temperature to:

(At max. expected ambient temperature)

Min. cooling capacity

at a temperature difference of

between ambient and fluid temps

NOTE:

Do not operate the tool at oil temperatures above 140 °F (60 °C). Operation at higher temperatures can cause operator

discomfort at the tool.

FILTER

Min. full-flow filtration

Sized for flow of at least:

(For cold temp. start-up and max. dirt-holding

capacity)

HYDRAULIC FLUID

Petroleum based

(Premium grade, anti-wear, non-conductive)

VISCOSITY

(At min. and max. operating temps)

NOTE:

When choosing hydraulic fluid, the expected oil temperature extremes that will be experienced in service determine

the most suitable temperature viscosity characteristics. Hydraulic fluids with a viscosity index over 140 will meet the

requirements over a wide range of operating temperatures.

*SSU = Saybolt Seconds Universal