Advertisement
Step 12
SQ25
1
Lift and fasten a right and left gable,
under angle at corner, to the door
track and rear wall angle with screws.
Hint: On the front gable, leave out 2
screws closest to center gable leg.
On the rear gable, use a bolt and nut
at the overlapping rear wall angle.
2
Join the left and right gables
together with a gable brace using a
bolt and nut in the bottom hole only.
3
Repeat Steps 1 & 2 for the door
track on the front of building, except
for the track supports, fasten as
shown.
STEP
3
Parts Needed For
Gables/Braces
STEP
1
Gable
Track Supports 6228
25
Left Gable Assemblies (2)
Right Gable Assemblies (2)
6635 Gable Brace (2)
STEP
2
6635 Gable Brace
Advertisement
