Advertisement
Step 9
SR22
Each wall panel has a crimped rib
on one side. The crimped rib should
go under the rib of the panel that
follows it.
1
Locate all of the wall panels and
set each one alongside the building.
2
Fasten the wall panels at the top
and bottom with screws.
3
Fasten the center of each panel to
the wall channel with screws.
4
Fasten overlapping ribs as before.
Parts Needed For
Wall Panels
Panels rest on
frame as shown
Use bolts and
nuts thru wall
angle overlap at
the top of panel
at rear.
22
6515 Wall Panel (8)
STEP
4
Crimped Rib
Underneath
6515
6515
STEP
1
STEP
2
Detail Showing
Center of Panel
Screwed to
Wall Channel
Bolt and nut
STEP
does not go
thru wall
3
channel at
overlap
Advertisement
