Kenwood DDX7018BT Instruction Manual page 15

Disc Disc
Playback operations
Audio playback information and key
operation
• For playback information, see "Source control screen"
on page 9.
• For key operations on the touch panel, see "Common
operation keys on source control screen" on
page 10.
Selecting a folder/track on the list
1
Display the folder/track list.
On the source control screen, touch as follows:
2
Select the item in the selected folder.
• For details about the list operation, see
page 11.
Select an item in each layer until you reach and
select the desired file.
Settings for disc playback
• Available items shown on the <DVD SETUP> screen
differ depending on the type of disc/file being
played back.
1
Display the <DVD SETUP> screen.
On the source control screen, touch as follows:
2
Make the settings.
[Menu Language]*
Select the initial disc menu language. (Initial:
English)
[Subtitle Language]*
Select the initial subtitle language or turn subtitles
off (OFF). (Initial: English)
[Audio Language]*
Select the initial audio language. (Initial: English)
<Dynamic Range Control>
You can change the dynamic range while playing
Dolby Audio encoded discs.
• Wide: Reproduces powerful sound at a low
volume level with its full dynamic range.
• Normal: Reduces the dynamic range a little.
• Dialog (Initial): Reproduces movie dialog more
clearly.
<Screen Ratio>
Select the monitor type to watch a wide screen
picture on the external monitor.
16:9 (Initial) 4:3 LB 4:3 PS
* You can change these settings only while DVD is inserted. Select
the language on the window, then touch [Close] to finish.
ENGLISH 13