Registering A Unit - Panasonic KX-TGD620 Series Operating Instructions Manual

useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 33).
1
MMENUN#104
2
Enter the desired name (10 characters
max.).
3
MOKN a MOFFN
Displaying the handset name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is "Off".
1
MMENUN#105
2
MbN: Select the desired setting. a MOKN
a MOFFN
Call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
MMENUN#256
2
Enter the base unit PIN (default: "0000").
R If you forget your PIN, see page 48.
3
MbN: Select the handsets to be restricted.
a MSELECTN
R " " is displayed next to the selected
handset numbers.
R To cancel the selected handsets:
MbN: Select the handset. a Press
MSELECTN again. " " disappears.
4
MOKN
5
MbN: Select a memory location. a MOKN
6
Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
MOFFN
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
KX-TGD62xE(en)_0319_ver023.pdf 33
Enhancing security for phone
calls
You can increase the security of phone
conversations by setting this feature to
"Enhanced". When "Enhanced" is selected,
is displayed. The default setting is
"Normal".
1
MMENUN#729
2
MbN: Selected the desired setting. a MOKN
3
MOFFN
Note:
R If you set repeater mode to "On"
(page 35):
– Security is set to "Normal" and
displayed.
– "Security" is not displayed in the
display menu (page 27).
R When enhanced security is enabled, sound
may cut in and out during conversations.
Changing the base unit PIN
Important:
R If you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see
page 48.
1
MMENUN#132
2
Enter the current 4-digit base unit PIN
(default: "0000").
3
Enter the new 4-digit base unit PIN. a
MOKN
4
MbN: "Yes" a MOKN a MOFFN

Registering a unit

Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
Programming
is
33
2018/03/19 10:02:49