Getting Started; Setting Up - Panasonic KX-TGD620 Series Operating Instructions Manual

Setting up

Connections
n Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit, then to the telephone line jack until
you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
4
5
Note:
R Use only the supplied Panasonic AC
adaptor PNLV226E.
R Use only the supplied telephone line cord.
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
KX-TGD62xE(en)_0319_ver023.pdf 11
n Charger
Note:
R Use only the supplied Panasonic AC
Battery installation
R USE ONLY rechargeable Ni-MH batteries
R Do NOT use alkaline/manganese/Ni-Cd
R Confirm correct polarities (
3
4
1
2

Getting Started

Connect the AC adaptor plug to the unit
until you hear a click.
Connect the AC adaptor to the power
outlet.
1
adaptor PNLV233E.
1
AAA (R03) size ( ).
batteries.
1
R Follow the directions on the display to set
up the unit.
2
, ).
11
2018/03/19 10:02:48