Removing The Front Bezel - Acer Veriton Z290G Service Manual

3. Slide the side bars downward to disengage the bars' inner tabs from the chassis, then detach the bars.

Removing the Front Bezel

1. Perform the "Pre-disassembly Procedure" on page 25.
2. Remove the side bars by following the procedure described on the previous section.
3. Use a flat screwdriver to pry off the front bezel from the rear cover.
4. Detach the front bezel from the rear cover and turn it over to access the webcam cable.
28 Veriton Z290G AIO Computer Service Guide