MSI MEG Z390 ACE Quick Start Manual page 68

fIpv4 PXE Support [Enabled]
When Enabled, the system UEFI network stack will support Ipv4 protocol. This item
will appear when Network Stack is enabled.
[Enabled]
[Disabled]
fIpv6 PXE Support [Enabled]
When Enabled, the system UEFI network stack will support Ipv6 protocol. This item
will appear when Network Stack is enabled.
[Enabled]
[Disabled]
fSATA Mode [AHCI Mode]
Sets the operation mode of the onboard SATA controller.
[AHCI Mode]
[RAID/ Optane Mode]
fM2_X-RST Pcie Storage Remapping [Disabled]
Enables or disables Intel Rapid Storage for M.2 PCIe storage device.
fM.2/Optane Genie [Disabled]
EnEnables or disables M.2 storage/ Optane memory. M.2 Genie provides a
convenient way for setting up M.2 device. When set to Enabled, it will support Intel
Optane memory when it is installed and support RAID function when 2 or more M.2
devices are installed.
fSATAx Hot Plug [Disabled]
Allows user to enable or disable the SATA hot plug support.
[Enabled]
[Disabled]
fHD Audio Controller [Enabled]
Enables or disables the onboard High Definition Audio controller.
f USB Configuration
Sets the onboard USB controller and device function. Press Enter to enter the sub-
menu.
fUSB Controller [Enabled]
Enables or disables all USB controller.
fXHCI Hand-off [Diasbled]
Enables or disables XHCI hand-off support for the operating system without XHCI
hand-off feature.
68
BIOS Setup
Enables the Ipv4 PXE boot support.
Disables the Ipv4 PXE boot support.
Enables the Ipv6 PXE boot support.
Disables the Ipv6 PXE boot support.
Specify the AHCI mode for SATA storage devices. AHCI
(Advanced Host Controller Interface) offers some
advanced features to enhance the speed and performance
of SATA storage device, such as Native Command Queuing
(NCQ) and hot-plugging.
Enables RAID function for SATA storage devices or
enables Optane function for NVMe or PCIe storage devices.
Enables hot plug support for the SATA ports.
Disables hot plug support for the SATA ports.