Honeywell SPZ-8000 Pilot's Manual page 120

Digital integrated flight control system
Hide thumbs Also See for SPZ-8000:
Table of Contents

Advertisement

SPZ--8000 Digital Integrated Flight Control System
Weather Radar Mode -- The weather radar mode annunciator
D
displays the status of the weather radar system. When in STBY, no
weather information is displayed. Weather is added to the display
and WX is annunciated when the WX button on the MFD controller
is pushed.
NOTES:
1. The MFD display is the only display that includes
2. When the optional TCAS is installed,
3. If dual weather radar controllers are installed, a
Target Alert Annunciator --
D
radar mode when the target alert mode is selected. This annunciator
turns
amber
of aircraft heading beyond the desired range.
place of TGT when the weather radar system is not in calibrated gain
mode.
Waypoint and Waypoint Data -- The number of available
D
waypoints is dependent upon the long range navigation system that
is providing the data. The selected range determines the number of
displayed waypoints. The TO waypoint is magenta. All other
waypoints are green. The DAT button on the MFD controller adds
waypoint identification and distance to the waypoint information on
the display.
Aircraft Symbol -- The white aircraft symbol is a visual
D
representation of the aircraft position in relation to the desired track.
TO Waypoint Identifier, ETA/TTG, and Distance Readout -- The
D
identifier, ETA (or TTG if ETA is not available), and distance to the
designated waypoint is displayed in the lower right corner of the
MFD.
Crosstrack Deviation -- Indicates the deviation in nautical miles to
D
the right (R) or left (L) of the desired track.
Displacement Line -- The
D
position of the designator relative to the nose of the aircraft.
Designator -- The power--up home position of the designator is the
D
aircraft present position. The designator is controlled by
the joystick, the SKP, and the RCL buttons on the MFD controller.
Multifunction Display (MFD) System
5-10
weather radar mode annunciators and the tilt
angle.
displayed when the radar is transmitting, but
weather is not selected for display.
left/right arrow is displayed in the weather radar
mode area to indicate which weather radar
controller is controlling the MFD weather display.
when a
red
target or stronger is detected within 7 1/2
cyan
TGT
is displayed below the weather
displacement line indicates the
TX
VAR
is displayed in
A28--1146--055
REV 2
is

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents