Honeywell SPZ-8000 Pilot's Manual page 127

Step
3 On the FMS CDU, the designator position is shown in the
scratch pad at the bottom of the screen. Use the
appropriate line select key to insert this position in the flight
plan. The FMS recomputes the flightpath, and the new
flight plan, shown in Figure 5--13, is displayed.
A28--1146--055
REV 2
SPZ--8000 Digital Integrated Flight Control System
SRP
0.5L
4:39
33. 3
Revised Flight Plan Display
Figure 5--13
Changing a Waypoint Procedure
Table 5--1
Procedure
Multifunction Display (MFD) System
AD--58097@
5-17