Component Failure
If a component fails, use the flowchart to perform the following:
Touch Screen
Failure
Component pass
Replace
Mainboard
Figure 4-4. Component Failure
Sound Problems
Perform the following:
1. Boot the computer.
2. Navigate to Start
Check the Device Manager to determine that:
The device is properly installed
There are no red Xs or yellow exclamation marks
There are no device conflicts
No hardware is listed under Other Devices
3. If updated recently, roll back the audio driver to the previous version.
4. Remove and reinstall the audio driver.
Wireless LAN
Speaker Failure
Failure
Test
component on
test bed
Component fail
Replace module
according to
procedure
Control Panel
System and Maintenance
Component
Failure
Change cables
Yes
Close
Camera
ODD Failure
Failure
Yes
connected
System
Device Manager.
Cable
properly?
NO
Close
113