ODD Failure
If an Optical Disk Drive failure is determined, use the following flowchart to determine the required action:
ODD Not Operating Correctly
If the ODD exhibits any of the following symptoms it may be faulty:
Audio CDs do not play when loaded
•
DVDs do not play when loaded
•
Blank discs do not burn correctly
•
DVD or CD play breaks up or jumps
•
Optical drive not found or not active:
•
Not shown in My Computer or the BIOS setup
•
LED does not flash when the computer starts up
•
The tray does not eject
•
Access failure screen displays
•
The ODD is noisy
•
Perform the following general solutions one at a time to correct the problem.
1.
Reboot the computer and retry the operation.
2.
Try an alternate disc.
3.
Navigate to Start
Storage panel.
4.
Navigate to Start
a.
Double-click lDE ATA/ATAPI controllers. If a device displays a down arrow, right-click on the device
and click Enable.
104
START
DVD does not
play
Check DVD
NG
cable connection
OK
Check DVD
NG
module
OK
Computer. Check that the ODD device is displayed in the Devices with Removable
Control Panel
System and Maintenance
Reconnect
OK
cable correctly
NG
Replace ODD
OK
module
NG
Replace
OK
Mainboard
System
Close
Close
Close
Device Manager.
Chapter 4