Chapter 2 System Utilities - Acer aHornet Aspire R3600 Service Manual

Chapter 2
System Utilities
The manufacturer or the dealer already configures most systems. There is
no need to run Setup when starting the computer unless you get a Run
Setup message.
The Setup program loads configuration values into the battery-backed nonvolatile
memory called CMOS RAM.
This memory area is not part of the system RAM.
NOTE: If you repeatedly receive Run Setup messages, the battery may be bad/flat. In
this case, the system cannot retain configuration values in CMOS.
Before you run Setup, make sure that you have saved all open files. The system reboots
immediately after you exit Setup.
15