Panasonic AJ-UPX360ED Operating Instructions Manual page 87

[OFF]
(Factory setting: [OFF])
[HDMI OUT ZEBRA]
Sets whether to superimpose the zebra signal to the output from the <HDMI> terminal. The settings of the zebra signal follow the zebra signal settings
in the [VIDEO OUT/LCD/VF] menu → [EI ASSIST].
[ON]
[OFF]
(Factory setting: [OFF])
@
NOTE
t The setting is fixed to [OFF] when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[HDMI OUT HDR]
Sets the output image from the <HDMI> terminal.
[SDR]
[HDR]
(Factory setting: [HDR])
@
NOTE
t The setting is fixed to [SDR] when set to following menu.
‑ [SYSTEM] menu → [REC FORMAT] → [480-59.94i/AVCHD SA]
‑ [SYSTEM] menu → [REC FORMAT] → [576-50.00i/AVCHD SA]
‑ [VIDEO OUT/LCD/VF] menu → [HDMI OUT] → [OUT FORMAT] → [720×480p]
‑ [VIDEO OUT/LCD/VF] menu → [HDMI OUT] → [OUT FORMAT] → [720×576p]
t When the [SCENE FILE] menu → [GAMMA MODE SEL] is set to anything other than [HLG], the camera image is output in the standard dynamic
range.
t This cannot be set when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[HDMI OUT V-Log]
Sets the output image from the <HDMI> terminal when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[V‑Log]
[V-709]
(Factory setting: [V-Log])
@
NOTE
t The setting is fixed to [V-709] when set to the following menu.
‑ [SYSTEM] menu → [REC FORMAT] → [480-59.94i/AVCHD SA]
‑ [SYSTEM] menu → [REC FORMAT] → [576-50.00i/AVCHD SA]
‑ [VIDEO OUT/LCD/VF] menu → [HDMI OUT] → [OUT FORMAT] → [720×480p]
‑ [VIDEO OUT/LCD/VF] menu → [HDMI OUT] → [OUT FORMAT] → [720×576p]
t This cannot be set when the [SYSTEM] menu → [COLOR SETTING] is set to [NORMAL].
[AV OUT]
[OUTPUT SW]
Enables/disables the output from the <AV OUT> terminal.
[ON]
[OFF]
(Factory setting: [ON])
[AV OUT CHAR]
Sets whether to superimpose the character to the output from the <AV OUT> terminal.
[ON]
[OFF]
(Factory setting: [ON])
[AV OUT ZEBRA]
Sets whether to superimpose the zebra signal to the output from the <AV OUT> terminal. The settings of the zebra signal follow the settings in the
[VIDEO OUT/LCD/VF] menu → [EI ASSIST] → [ZEBRA].
[ON]
[OFF]
(Factory setting: [OFF])
Chapter 4 Operation — Menu settings
Does not superimpose.
Superimposes.
Does not superimpose.
Outputs in the standard dynamic range.
Outputs in the high dynamic range.
Outputs in same color as the recording image.
Outputs in a converted color equivalent to standard CINE-LIKE. Setting suitable for a preview.
Outputs the video and audio.
Does not output the video and audio.
Superimposes.
Does not superimpose.
Superimposes.
Does not superimpose.
– 87 –